Welcome! Use the login menu to access:
Customer Portal
SolarWinds customers can download purchased software, renew maintenance, & more in our updated Customer Portal!
Community
After logging in, community members can rate & review SolarWinds software & participate in forums on thwack.com.
Partner Portal
SolarWinds channel partners will find all the resources they need in the Partner Portal, including exclusive partner tools.
SolarWinds Knowledge Base
- Home > Support > Knowledge Base Home > Toolset (Engineer's and Standard) > Router CPU Load (Toolset)
View Articles by Category
There are no sub categoriesCategory » Router CPU Load (Toolset)
There were 3 articles found in this category:
Configuring Router CPU Load
Perform the following steps: 1. Select "Add new CPU Load bar" from the "Bar" menu 2. Enter the IP address (or Hostname) 3. Enter the SNMP Community string for a router For assistance on community strings for Cisco devices, click on the following link: http://www.cisco.com/univercd/cc/td/doc/pro ...- Error message: "xxx does not support the Cisco AvgBusy MIB or is not responding to SNMP polls"
If you get an error message like "xxx does not support the Cisco AvgBusy MIB or is not responding to SNMP polls", then you probably need to reconfigure your router. Add the following lines to your Cisco router's configuration: snmp-server community public RO snmp-server community some-secret RW ...
- Monitoring more than 15 devices using Router CPU Load
The Router CPU Load was initially limited to 15 devices in the Professional Edition (There should be no limit). This issue has been resolved in the latest download Patch for the Router CPU Load which is available at http://solarwinds.net/Updates.
