SolarWinds Knowledge Base

Category » General (Toolset)

There were 23 articles found in this category:

1. Toolset Release Notes 10.8
   These release notes provide additional guidance for SolarWinds Toolset 10.8. Fixes in Toolset 10.8 This release of Toolset includes the following fixes: Added IPv6 support for TFTP Server Advanced CPU Load, Router CPU Load, and SNMP Sweep classic tools now support IPv6 and SNMPv3 Workspace St ...
2. Customizing SSH
   Customizing SSH on Toolset Exit out of the Toolset application. Right-click the SolarWinds Toolset Integration icon on the system tray and select Exit. If you have an Orion website open, close it now. Click Start > Control Panel > Administrative Tools > Services. Select the Orion Too ...
3. SolarWinds SNMP Walk: A new tool for collecting SNMP MIB walks
   From SolarWinds R&D: Troubleshooting issues may require the collection of SNMP walks. Until now, we've had to use Toolset or different 3rd party tools to collect an SNMP walk. Now, Development has provided a lightweight tool that should simplify the process of getting these SNMP walks. Bene ...
4. Toolset v10.7 Release Notes
   These release notes provide additional guidance for SolarWinds Toolset 10.7. New Features in 10.7 Toolset version 10.7 provides the following enhancements: Improved Toolset/Orion integration and security: communication between Orion and Toolset is now secure via SSL and Toolset now handles SN ...
5. How do I add an SNMP v3 Node?
   This Technical Reference, Implementing SNMP v3, describes how to add SNMPv3 devices to Orion management. The paper maps the required SNMPv3 fields to the Orion dialog fields used to add an SNMPv3 node.
6. Where can I find Toolset application log files?
   Workspace Studio Workspace Studio log files can be found in the following location: Path: \Application Data\SolarWinds\ Example: C:\Documents and Settings\All Users\Application Data\SolarWinds These log files are limited to 10MB in size, however this size limitation may be temporarily exceeded. ...
7. Toolset and FIPS Compatibility
   Toolset version 10.6 does support FIPS, however there is a scenario where compatibility could become broken. The primary issue is related to the order of installation and configuration. In previous versions, there were problems if Toolset was installed first and then enabled FIPS. When performed ...
8. SNMP Realtime Graph and Realtime Interface Monitor show different values when monitoring the same interface
   The SNMP Realtime Graph is showing the raw value of if(In/Out)Octets. One octet is equivalent to eight bits (or one byte). Therefore, SNMP Realtime Graph displays values in bytes. Realtime Interface Monitor displays values in bits per second, not bytes per second, which explains the different nu ...
9. How do I get rid of the UAC prompts when running Toolset tools on my Vista or later system?
   On systems running Windows Vista (or later), the operating system will provide a User Account Control (UAC) prompt when you attempt to run a program that requires elevated privileges. Many of Toolset's tools require elevated privileges. For these tools you can start the tool as administrator (r ...
10. Backing up or moving SolarWinds Toolset and preserving all settings and history
    To back up SolarWinds Toolset settings and history: Locate your SolarWinds Toolset program directory. Toolset VersionDirectory Version 2001 C:\Program Files\SolarWinds\200X Engineers Edition Version 5, 7, or 8 C:\Program Files\SolarWinds\Engineers Edition Version 9 or later C:\Program File ...
11. Credentials from Workspace Studio are not shared with the Classic Tools and vice versa
    The Workspace Studio and the Classic Tools save their credentials to two different locations. Workspace Studio saves this information in the file named CredentialPool.xml. The file is located in the following locations: Windows XP or Windows Server 2003: C:\Documents and Settings\useraccount\Lo ...
12. Error message: "Out of Memory Error" when you try to use SolarWinds Toolset
    Windows 98 and Windows ME, both have memory leak issues. The above error can occur when several programs are running simultaneously. We recommend upgrading to Windows 2000 or Windows NT. If you are not running Windows 98 or Windows ME, then send an email to Support@SolarWinds.Net for further ass ...
13. Can't export or publish to web on Windows 2003 Server Service Pack 1
    This is due to a module in the export engine which is not being allowed to execute due to a new security setting in the SP1 package. Here is how to allow the export engine to run: 1. Click Start, click Run, type sysdm.cpl, and then click OK. 2. Click the Advanced tab, click Performance, and then ...
14. Error message: "430" or "Cannot open database" when you try to use any Toolset tool
    The most common reason for the problem is corrupt MDAC (Microsoft Data Access Components). Download and install the Microsoft Jet 4.0 SP8 from http://support.microsoft.com/default.aspx?scid=kb;en-us;239114#3 You may also need to install MDAC from http://www.microsoft.com/downloads/details.aspx? ...
15. Error message: "Cannot open Discovery.cfg" when you try to use any Toolset tool
    The most common reason for the problem is corrupt MDAC (Microsoft Data Access Components). For Windows 2000 Service Pack 4: Download and install the Microsoft Jet 4.0 SP8 from http://support.microsoft.com/default.aspx?scid=kb;en-us;239114#3 You may also need to install MDAC 2.8 from http://supp ...
16. Error message: "MIB Not Supported" for Windows 2000 SP2/SP3
    If print spooling is not enabled on the machine, then not all of the supported MIBs will be populated. We recommend checking to see if print spooling is enabled.
17. Error message: "Out of Memory Error" when you try to use SolarWinds Toolset
    Windows 98 and Windows ME, both have memory leak issues. The above error can occur when several programs are running simultaneously. We recommend upgrading to Windows 2000 or Windows NT. If you are not running Windows 98 or Windows ME, then send an email to Support@SolarWinds.Net for further ass ...
18. False virus detection alerts in SolarWinds software
    Some of the SolarWinds Tools, like the TFTP Server, must open and "listen" on specific TCP Ports to function correctly. A few anti-virus programs see this and assume that the program is a virus because it opens a TCP Port.
19. Question marks added to email messages you send from Outlook Web Access after you install Solarwinds Toolset
    The problem is two older dlls are being installed in the System32 directory and registered. Microsoft started installing these files in C:\Program Files\Common Files\Microsoft Shared\Triedit, which is not where the install program is looking for. The two files are: dhtmled.ocx and triedit.dll To ...
20. Utilization graphs spike to 100%
    Usually when this issue is present it is because the device that you're polling is updating its SNMP counters less frequently that you're polling it. For instance, if the device only updates its counters every 15 seconds but you're polling it every 5 seconds you will see 2 values that are very l ...